|All Surfaces||Remove all dirt, grease, oil, salt, and chemical contaminants. Mold and mildew areas must be cleaned with a chlorinated cleaner or bleach solution.
Rinse thoroughly with freshwater and allow to fully dry. All surfaces must be dry at the time of application.
|Steel||Surfaces should be blast cleaned to a near-white finish using a suitable abrasive. And/or by using the surface preparation with requirements. of the primer and/or as the Spec of the project. The surface must be thoroughly dry and apply the protective coating within 4 hours|
|Hand or power tool clean to remove all loose or unsound concrete, masonry, or previous coating.|